Submitted by support on Tue, 2009-11-24 19:34
The GlideTV Navigator incorporates a rechargeable battery which is designed to last at least 2 weeks under normal conditions.
 
Before using the Navigator, set up the Charging Station (B) and dock the Navigator (A) at least
once. This will unlock the buttons and ensure that the Navigator will charge.
 
  1. To charge the Navigator, first plug the supplied USB cable (E) into the supplied power adapter (D). 
    charging_power_adapter.jpg 
  2. Plug the power adapter into the wall outlet. The Green LED will light, indicating that the wall adapter is receiving power.
  3. Plug the other end of the USB cable (E) into the Charging Station (B)
    charging_base.jpg
  4. Place the Navigator (A) onto the charging station (B). When placing the Navigator into the Charging Station you will feel the Navigator drop into place. Orientation of the Navigator relative to the Charging Station does not matter. It will charge as long as it is fully seated in the Charging Station.
    charging_navigator.jpg

  5. When the Navigator has been properly placed into the Charging Station, the buttons on the device will flash twice to indicate that it has been correctly docked and the Power button will begin to flash on/off slowly to indicate that the battery is being charged.

  6. Once the device has been charged, the Power button will remain lit to indicate that the battery has reached full capacity.

    NOTES:
The Navigator cannot be used while charging in the Charging Station.
The Battery typically takes around 4 hours to reach a full charge.
 

 

»